Hotline 24/7: 0938 870 608
Email: khoakv@navitec.vn
Hotline 24/7: 0938 870 608
Email: khoakv@navitec.vn
IE2, gang, zone 21, điện áp 400V∆/690VY, chân đế, 3 temperature sensors
| 1MB1511-0CA23-4AB4 | INNOMOTICS XP motor type: 1CV2072A low-voltage motor, IEC squirrel-cage rotor, self-cooled IP65 temperature class 155(F) according to 130(B) gray cast iron housing Basic Line High Efficiency IE2 2-pole frame size 71M 0.37 kW (50 Hz) Ex tb IIIC T120° Db version for zone 21 with conductive dust standard color RAL 7030, if no order code is specified for selecting another color. 3 AC 50 Hz 400 VD/690 VY * 3 AC 60 Hz 460 VD IM B3 3 PTC thermistors for disconnection (2 terminals) Terminal box at top |
| 1MB1511-0CA33-4AB4 | 0.55 kW |
| 1MB1511-0DA23-4AB4 | 0.75 kW |
| 1MB1511-0DA33-4AB4 | 1.1 kW |
| 1MB1511-0EA03-4AB4 | 1.5 kW |
| 1MB1511-0EA43-4AB4 | 2.2 kW |
| 1MB1511-1AA43-4AB4 | 3 kW |
| 1MB1511-1BA23-4AB4 | 4 kW |
| 1MB1511-1CA03-4AB4 | 5.5 kW |
| 1MB1511-1CA13-4AB4 | 7.5 kW |
| 1MB1511-1DA23-4AB4 | 11 kW |
| 1MB1511-1DA33-4AB4 | 15 kW |
| 1MB1511-1DA43-4AB4 | 18.5 kW |
| 1MB1511-1EA23-4AB4 | 22 kW |
| 1MB1511-2AA43-4AB4 | 30 kW |
| 1MB1511-2AA53-4AB4 | 37 kW |
| 1MB1511-2BA23-4AB4 | 45 kW |
| 1MB1511-2CA23-4AB4 | 55 kW |
| 1MB1511-2DA03-4AB4 | 75 kW |
| 1MB1511-2DA23-4AB4 | 90 kW |
| 1MB1511-3AA03-4AB4 | 110 kW |
| 1MB1511-3AA23-4AB4 | 132 kW |
| 1MB1511-3AA43-4AB4 | 160 kW |
| 1MB1511-3AA53-4AB4 | 200 kW |
IE2, vật liệu gang, 4 cực (1500v/p), zone 21, điện áp 400/690, chân đế, 3 temperature sensors:
| 1MB1511-0CB23-4AB4 | INNOMOTICS XP motor type: 1CV2072B low-voltage motor, IEC squirrel-cage rotor, self-cooled IP65 temperature class 155(F) according to 130(B) gray cast iron housing Basic Line High Efficiency IE2 4-pole frame size 71M 0.25 kW (50 Hz) Ex tb IIIC T120° Db version for zone 21 with conductive dust standard color RAL 7030, if no order code is specified for selecting another color. 3 AC 50 Hz 400 VD/690 VY * 3 AC 60 Hz 460 VD IM B3 3 PTC thermistors for disconnection (2 terminals) Terminal box at top |
| 1MB1511-0CB33-4AB4 | 0.37 kW |
| 1MB1511-0DB23-4AB4 | 0.55 kW |
| 1MB1511-0DB33-4AB4 | 0.75 kW |
| 1MB1511-0EB03-4AB4 | 1.1 kW |
| 1MB1511-0EB43-4AB4 | 1.5 kW |
| 1MB1511-1AB43-4AB4 | 2.2 kW |
| 1MB1511-1AB53-4AB4 | 3 kW |
| 1MB1511-1BB23-4AB4 | 4 kW |
| 1MB1511-1CB03-4AB4 | 5.5 kW |
| 1MB1511-1CB23-4AB4 | 7.5 kW |
| 1MB1511-1DB23-4AB4 | 11 kW |
| 1MB1511-1DB43-4AB4 | 15 kW |
| 1MB1511-1EB23-4AB4 | 18.5 kW |
| 1MB1511-1EB43-4AB4 | 22 kW |
| 1MB1511-2AB53-4AB4 | 30 kW |
| 1MB1511-2BB03-4AB4 | 37 kW |
| 1MB1511-2BB23-4AB4 | 45 kW |
| 1MB1511-2CB23-4AB4 | 55 kW |
| 1MB1511-2DB03-4AB4 | 75 kW |
| 1MB1511-2DB23-4AB4 | 90 kW |
| 1MB1511-3AB03-4AB4 | 110 kW |
| 1MB1511-3AB23-4AB4 | 132 kW |
| 1MB1511-3AB43-4AB4 | 160 kW |
| 1MB1511-3AB53-4AB4 | 200 kW |
| B30 | Version additionally (or dust Ex tc - Zone 22 ™ ’4) 22) |
| B31 | Version IIC with stamping of MB |
| C02 | VIK version |
| B40 | Version for converter operation in basic version with operating data SINAMICS G120 with PM240-2. 15) |
| B41 | Version for converter operation in basic version with operating data SINAMICS S150 |
| B43 | Version for converter operation with power data on the PWM converter |
| Y68 • and converter type | Operating data such as the B40 order code with alternative SINAMICS converter on the rating plate |
| Q11 | 1 or 3 PTC thermistors - for tripping (2 terminals) |
| Q12 | 2 or 6 PTC thermistors - for alarm and tripping (4 terminals) |
| Q23 | 1 KTY84-130 temperature sensor (2 terminals) |
| Q25 | 2 KTY84-130 temperature sensors (4 terminals) |
| Q35 | 1 Pt1000 resistance thermometer (2 terminals) |
| Q36 | 2 Pt1000 resistance thermometers (4 terminals) |
| R10 | Rotation of the terminal box through 90°, entry from DE |
| R11 | Rotation of the terminal box through 90°, entry from NDE |
| R12 | Rotation of the terminal box through 180° |
| R18 | Metal cable gland, maximum configuration |
| R50 | Larger terminal box ^41 |
| N05 | Temperature class 155 (F), utilized acc. to 130 (B), coolant temperature 45 °C, derating approx. 4 % 2‘ |
| N06 | Temperature class 155 (F), utilized acc. to 130 (B), coolant temperature 50 °C, derating approx. 8 % |
| N07 | Temperature class 155 (F), utilized acc. to 130 (B), coolant temperature 55 °C, derating approx. 13 % |
| N08 | Temperature class 155 (F), utilized acc. to 130 (B), coolant temperature 60 °C, derating approx. 18 % |
| N30 | Increased air humidity/temperature with 30 to 60 g water per m3 of air |
| N31 | Increased air humidity/temperature with 60 to 100 g water per m3 of air |
| Y50 • CT.. °Cor IA .... m above sea level | Temperature class 155 (F), utilized acc. to 130 (B), with higher coolant temperature and/or installation altitude |
| S00 | Unpainted (only cast-iron parts primed) |
| S01 | Unpainted, only primed |
| S02 | Special paint finish C3 |
| S03 | Special paint finish sea air resistant C4 |
| S06 | Top coat polyurethane |
| Y53 • and paint finish RAL.... | Paint finish in other standard RAL colors: RAL 1015, 5002, 5009, 5010, 5012, 5015,6011,7001,7011,7016, 7031, 7032, 7035, 7037, 8012, 9005 (see Catalog Section 1 "Introduction") |
| Y56 • and paint finish RAI_____ | Paint finish in special RAL colors: For RAL colors, see "Special paint finish in special RAL colors" (see Catalog Section 1 "Introduction") |
| Y66 • und Anstrich | Non-standard colors Colors see "Paint finish in non-standard colors (see Catalog Section 1 "Introduction") |
| F70 | Mounting of separately driven fan 17) |
| G30 | Mounting of LL841 (FITL); 1024 I explosion-protected rotary pulse encoder |
| F77 | Low-noise version for 2-pole motors with clockwise direction of rotation |
| F78 | Low-noise version for 2-pole motors with counterclockwise direction of rotation |
| G43 | Mechanical protection for encoder |
| H00 | Protective cover |
| H01 | Screwed-on (instead of cast) feet |
| H02 | Vibration-proof version; vibration resistance to Class 3M4 according to IEC 60721-3-3:1994 |
| H03 | Condensation drainage holes e) |
| H07 | Rust-resistant screws (externally) |
| H19 | IP66 degree of protection |
| H20 | IP65 degree of protection 4) |
| H22 | IP56 degree of protection b) |
| H23 | Drive-end seal for flange-mounting motors, oil-tight to 0.1 bar3* |
| D03 | Coolant temperature -40 to +40 °C 20) |
| D22 | Motor without CE marking for export outside EEA (see EU Regulation 640/2009) |
| D23 | Motor exclusively according to the Energy-related Products Law, Article 1 dated 27.2.2008, motor to be used in means of transport for persons and goods |
| D32 | Ex certification for China |
| D34 | China Energy Efficiency Label |
| D35 | EAC Ex certificate for the Eurasian Customs Union 18^ |
| D37 | lECEx certification |
| D70 | MEPS Australia |
| L20 | Located bearing DE |
| L21 | Located bearing NDE |
| L22 | Bearing design for increased cantilever forces '3‘ |
| L23 | Regreasing device |
| L25 | Bearings reinforced at both ends for DE and NDE, bearing size 63 |
| L51 | Bearing insulation NDE |
| Q01 | Measuring nipple for SPM shock pulse measurement for bearing inspection |
| L00 | Vibration severity grade B la) |
| L01 | Balancing without feather key |
| L02 | Full-key balancing |
| L04 | Shaft extension with standard dimensions, without feather keyway |
| L05 | Standard, cylindrical shaft extensicn (second shaft extension) NDE acc. to EN 50347 |
| L06 | Standard shaft made of stainless steel (e.g. 1.4021) |
| L07 | Shaft extension run-out in accordance with IEC 60072-1 precision class |
| L08 | Shaft extension run-out, concentricity and perpendicularity in accordance with IEC 60072-1 precision class for flange-mounted motors |
| Y58 • and customer specifica- tions | Non-standard cylindrical shaft extension, DE 7> |
| Y59 • and customer specifica- tions | Non-standard cylindrical shaft extension, NDE7' |
| F76 | Metal external fan 8) |
| Q02 | Anti-condensation heating for 230 V (2 terminals) 9^ |
| Q03 | Anti-condensation heating for 115 V (2 terminals) 9^ |
| M10 | Second rating plate, loose |
| M11 | Rating plate, stainless steel |
| Y80 • and customer specifica- tions | Additional rating plate with deviating rating plate data |
| Y82 • and customer specifica- tions | Additional rating plate with customer specifications |
| Y84 • and customer specifica- tions | Additional information on rating plate and on package label (max. 20 characters) |
| B02 | Inspection certificate 3.1 according to EN 10204 1D> |
| B60 | Document - Electrical datasheet |
| B61 | Document - Order dimensional drawing |
| B83 | Type test with heat run for horizontal motors, with acceptance |
| B90 | "Basic" documentation package |
| B91 | "Advanced" documentation package |
| B92 | "Projects" documentation package |
| B99 | Wire-lattice pallet packaging |
| M01 | Connected in star for dispatch |
| M02 | Connected in delta for dispatch |
| L21 | Located bearing NDE 11J |
| L22 | Bearin^tjJ^sign for increased cantilever forces |
| L25 | Bearings reinforced at both ends for DE and NDE, bearing size 63 |
| L30 | Drainage for used grease |
| L37 | Special version with higher speeds |
| L50 | Bearing insulation DE 211 |
| L51 | Bearing insulation NDE 21) |
| Q01 | Measuring nipple for SPM shock pulse measurement for bearing inspection |
| LOO | Vibration severity grade B |
| L01 | Balancing without feather key1B) |
| L02 | Full-key balancing 1B) |
| L04 | Shaft extension with standard dimensions, without feather keyway |
| L05 | Standard, cylindrical shaft extension (second shaft extension) NDE acc. to EN 50347 |
| L06 | Standard shaft made of stainless steel (e.g. 1.4021) |
| L07 | Shaft extension run-out in accordance with IEC 60072-1 precision class |
| L00 | Shaft extension run-out, concentricity and perpendicularity in accordance with IEC 60072-1 precision class for flange-mounted motors |
| Y58 • and customer specifications | Non-standard cylindrical shaft extension, DE w |
| Y59 • and customer specifications | Non-standard cylindrical shaft extension, NDE 3) |
| Y60 • and customer specifications | Special shaft steel |
| F68 | Metal fan made of brass |
| F90 | Without external fan and without fan cover |
| Q02 | Anti-condensation heating for 230 V (2 terminals) |
| Q03 | Anti-condensation heating for 115 V (2 terminals) |
| Q06 | Anti-condensation heating for 400 V (2 terminals) |
| Y81 • and customer specifications | Separately driven fan with non-standard voltage and/or frequency |
| M10 | Second rating plate, loose |
| Y80 • and customer specifications | Additional rating plate with deviating rating plate data18' |
| Y82 • and customer specifications | Additional rating plate with customer specifications |
| Y84 • and customer specifications | Additional information on rating plate and on package label (max. 20 characters) |
| Y85 • und Besteller-angabe | Adhesive label, supplied loose (printed with: Article No., Serial No.: 2 lines of text) |
| Q80 | Extension of the liability for defects by 12 months to a total of 24 months (2 years) from delivery 4>2S> |
| Q81 | Extension of the liability for defects by 18 months to a total of 30 months (2.5 years) from delivery 4> |
| Q82 | Extension of the liability for defects by 24 months to a total of 36 months (3 years) from delivery A> |
| Q83 | Extension of the liability for defects by 30 months to a total of 42 months (3.5 years) from delivery 4> |
| Q84 | Extension of the liability for defects by 36 months to a total of 48 months (4 years) from delivery 4> |
| Q85 | Extension of the liability for defects by 48 months to a total of 60 months (5 years) from delivery 4> |
| B02 | Inspection certificate 3.1 according to EN 10204 4' |
| B51 | Equivalent circuit diagram |
| B52 | Starting diagram (torque vs. speed and current vs. speed) |
| B60 | Document - Electrical datasheet |
| B61 | Document - Order dimensional drawing |
| B65 | Standard test (routine test) with acceptance |
| B67 | Temperature test without acceptance |
| B68 | Temperature test with acceptance |
| B82 | Type test with heat run for horizontal motors, without acceptance |
| B83 | Type test with heat run for horizontal motors, with acceptance |
| B90 | "Basic" documentation package |
| B91 | "Advanced" documentation package |
| B92 | "Projects" documentation package |
| M01 | Connected in star for dispatch |
| M02 | Connected in delta for dispatch |
Địa chỉ: 1651/74/8 Lê Văn Lương, Ấp 3, Xã Hiệp Phước, TP.HCM
VPGD: 58/4 Nguyễn Văn Mại, phường Tân Sơn Nhất, TP.HCM
DT: 028 2214 2216 
Email: info@navitec.vn
Hotline 24/7: 093 887 0608 (Mr. Khoa) Email: khoakv@navitec.vn
https://navitec.vn
